The first thing that comes to a traveler’s mind is the vehicle that will move around the entire trip. Additionally, one must select the appropriate one if the vacation is in an exciting location.
Although the Jeep Cherokee is a trustworthy travel companion, it is a machine with hundreds of interrelated pieces, and like all machines, it occasionally fails to perform as intended. This article discusses the most frequent reasons for Jeep Cherokee breakdowns and solutions.
What could be the cause of the Jeep not starting but having power?
A Jeep Cherokee won’t start for a variety of reasons. Some of them include the following:
- Defective Battery:
A weak or dead battery is the most common cause of your Jeep Cherokee won’t start but having power. If the starting issue is related to the battery, further investigation and a battery voltage test will reveal this. You can do a test to measure the voltage between the battery poles, check the acid level, and evaluate the starter battery’s condition. Your automobile can also not start due to corroded battery terminals while cleaning them is necessary.
- Weak Key Fob Battery:
If your Jeep Cherokee doesn’t start by pushing the button, a weak essential fob battery can be the cause. Since the battery only transmits the signal for locking and unlocking, you can still start your car without any issues. The door no longer locks or unlocks with a button press when the essential fob battery dies. Then, the doors must be physically opened.
Also Read: Best MCLAREN 720S Background Compilation
- Faulty Starter Solenoid:
One of the most critical components for starting your car is a starter solenoid. In other words, employing electrical charges from the car battery and igniting equipment initiates a series of electrical operations to ignite the combustion chamber. The engine in a vehicle is started by sparking. If something is not working, checking the fuses and changing any that need to be changed is advisable.
- Faulty spark plugs
The engine won’t start if the spark plugs aren’t working. A flaw frequently does not affect the spark plugs themselves. Instead, the ignition system’s plug connections loosen. You can solve the issue immediately if only one plug is genuinely loose. If a spark plug breaks, it must be changed at the workshop.
- Negative Starter Relay:
Despite their link, the starting solenoid and starting relay are distinct. The starter relay initiates a current that turns on the starting solenoid. There will only be enough power if it functions properly to start your car. If not, the battery’s ability to charge electrically will be restricted.
Common Jeep Cherokee problems:
- Stalling Of Engine:
The main reason the 2019 jeep cherokee won’t start but has power is the engine shutting down. A broken fuel pump relay in the fully integrated power module of the Jeep Cherokee regularly causes engine problems. The software of the powertrain control module has complications. The question arises What happens when your engine blows while driving? This necessitates an entirely new engine. A blown engine can be costly and frequently requires a total engine replacement.
- Faulty Ignition Switch:
Jeep Grand Cherokees from the 2005 to 2007 model years were among the 800,000 cars FCA recalled due to a faulty ignition switch. It was discovered that the ignition key would turn to the “off” or “accessory” position whenever the driver’s knee made even the slightest contact with the moving vehicle. More than 650,000 of these models were impacted by this problem.
- Transmission Problems:
A minor transmission problem can significantly impact the performance of your Jeep Cherokee since the transmission is in charge of turning the appropriate amount of power into the appropriate amount of speed. Shift delays, grinding or jumping during acceleration, shaking of the vehicle at any speed, a burning odor, or whistling noises emanating from beneath the hood are the significant issues for the 2020 Jeep Cherokee won’t start but has power.
- Failed Alternator:
Alternator failure is another likely reason for the Jeep not starting but has power. In some cases, an alternator short is all that is needed to fix the problem. However, models from 2012 through 2014 could have a faulty alternator that could set the automobile on fire while it is being driven.
Conclusion:
If your Jeep Cherokee doesn’t start but has power, like any other car, check the basics first, including the battery and cables, before taking it to a mechanic. Examining the battery terminals and attempting a jumpstart are the next steps.
The problem is typically a dead battery that must be quickly jumpstarted, but in rare cases, there may be a worse problem. If so, it would be wise to speak with an experienced mechanic.
